Power Tools
Brand: AIRCRAFT
MPN: AT0001-SK06
AirCraft Air Stapler Service Kit – Safety Tip Kit (For AT0001) (AT0001-SK06)
At a Glance: Replacement contact safety (safety tip) components for the AirCraft AT0001—helps restore safe, correct tool activation.
The contact safety tip is one of the most important parts of any pneumatic stapler/nailer—it’s what helps prevent the tool from firing unless it’s correctly pressed against the workpiece. If the safety tip becomes sticky, worn, bent, or unreliable, the tool can misfire, refuse to fire, o..
N$ 155.25
Ex VAT:N$ 135.00
Brand: AIRCRAFT
MPN: AT0022
AirCraft Air Tire Buffer For Roughing Low Areas, Recapping And Tire Scuffing (AT0022)
At a Glance: Pneumatic tyre buffer designed for controlled roughing, scuffing and surface preparation—ideal for recapping, patch work and adhesion prep.
Tyre repair and recapping work lives or dies on surface preparation. If the rubber isn’t keyed properly, bonding suffers—and the job won’t last. The AirCraft AT0022 Air Tire Buffer is built for the real-world grind: roughing low areas, scuffing tyre surfa..
N$ 1,410.48
Ex VAT:N$ 1,226.50
Brand: AIRCRAFT
MPN: AT0017-19
AirCraft Bearing for Air Die Grinder 6mm Mini (AT0017-19)
At a Glance: Replacement bearing for the AirCraft AT0017 6mm Mini Air Die Grinder—helps keep the spindle/rotor running smooth and stable.
The AirCraft AT0017-19 Bearing is a precision component that supports smooth, controlled rotation inside your AT0017 6mm Mini Air Die Grinder. Bearings take the brunt of high-speed work—dust, vibration, heat, and long run times—so when one starts to wear out, you’ll usually feel it fast: rou..
N$ 49.68
Ex VAT:N$ 43.20
Brand: AIRCRAFT
MPN: AT0016-10
AirCraft AT0016-10 Bearing For Air Ratchet Wrench
At a Glance: Replacement ball bearing that supports smooth, low-friction rotation inside the AirCraft AT0016 Air Ratchet Wrench.
When an air ratchet starts sounding rough, feeling gritty, or losing that smooth “glide” under load, a worn bearing is often the prime suspect. The AirCraft AT0016-10 Bearing is a precision replacement ball bearing for the AirCraft Air Ratchet Wrench (AT0016 series). It supports rotating components, reduces fric..
N$ 49.68
Ex VAT:N$ 43.20
Brand: AIRCRAFT
MPN: AT0016-26
AirCraft AT0016-26 Bearing For Air Ratchet Wrench
At a Glance: Replacement needle roller bearing for the AirCraft AT0016 air ratchet—built for compact support where load capacity and smooth rotation matter.
Needle bearings are the muscle in small spaces—lots of load capacity packed into a compact bearing. The AirCraft AT0016-26 Bearing is a replacement needle roller bearing for the AirCraft Air Ratchet Wrench (AT0016 series). It supports rotating components in the drive/ratchet assembly,..
N$ 90.85
Ex VAT:N$ 79.00
Brand: AIRCRAFT
MPN: AT0025-11
AirCraft Bevel Gear For AT0025 (AT0025-11)
At a Glance: Replacement bevel gear for the AirCraft AT0025—restores proper drive transfer and smooth gear operation when the original gear is worn or damaged.
Inside many pneumatic tools, bevel gears do the clever job of transferring drive at an angle—turning motor rotation into usable output where space and tool geometry demand it. When a bevel gear wears, chips, or strips, you’ll hear it first (grinding, clicking, whining), and then you’ll feel..
N$ 326.60
Ex VAT:N$ 284.00
Brand: AIRCRAFT
MPN: AT0025-19
AirCraft Bevel Pinion Gear For AT0025 (AT0025-19)
At a Glance: Direct replacement bevel pinion gear spare part for AirCraft AT0025.
The AirCraft AT0025-19 bevel pinion gear is a precision replacement spare part designed for AirCraft AT0025 tools. When a gear starts wearing,
you’ll often notice rough running, extra noise, inconsistent drive, or a loss of smooth power transfer. Replacing the bevel pinion gear helps bring
the drivetrain back to proper engagement so the tool operates the..
N$ 202.40
Ex VAT:N$ 176.00
Brand: AIRCRAFT
MPN: AT0016-25
AirCraft AT0016-25 Bias Axle For Air Ratchet Wrench
At a Glance: Replacement bias axle/shaft for the AirCraft AT0016 air ratchet—supports alignment and stable rotation within the drive/gear mechanism.
In an air ratchet, shafts and axles are the quiet heroes—keeping moving parts aligned so gears mesh correctly and torque flows where it should. The AirCraft AT0016-25 Bias Axle is a replacement axle/shaft used in the AirCraft Air Ratchet Wrench (AT0016 series) mechanism. It provides a stabl..
N$ 34.27
Ex VAT:N$ 29.80
Brand: AIRCRAFT
MPN: AT0016-40
AirCraft AT0016-40 Block Ring For Air Ratchet Wrench
At a Glance: Replacement block ring (retaining circlip) for the AirCraft AT0016 air ratchet—keeps key components securely located under vibration and load.
If you’ve ever opened a tool and found a “mystery ring” missing… that ring usually wasn’t optional. The AirCraft AT0016-40 Block Ring is a replacement retaining ring (circlip/snap ring style) used in the AirCraft Air Ratchet Wrench (AT0016 series) to hold components in their correct..
N$ 3.91
Ex VAT:N$ 3.40